http://www.packagingplant.com
  • English
  • Spanish
  • Chinese

Equipment Listings - Hammermill

    • IEN# 119668 - 150 HP Hammer Mill mfg. Prater. This unit features 440/3/60- 3565 RPM and is a model GOH-38. This 1972 unit has never ran, like new condition and still on the Factory shipping Skid. With 66 Hammers of 2" x 6 1/4" x 1/4". It has 1,368 sq/in screen...
      For Information...
    • IEN# 119188 - 100 HP motor included HammerMill, mfg. SPROUT WALDRON model #3812
      For Information...
    • IEN# 119199 - Pre Breaker Hammermill mfg. RIETZ 25 HP INLET 22"X24". MODEL# RE 15-H7E328.
      For Information...
    • IEN# 119198 - Hammermill mfg. SPROUT WALDRON MODEL 36 DOUBLE RUN DISC MILL WITH TWO 75HP MOTORS 1180 RPM
      For Information...
    • IEN# 119167 - 100 HP William Wood Hammer Mill. Model Meteor no 12 without Motor. This unit is all welded steel construction with large diameter rotor with high hammer tip speed requiring only 1500-1800 RPM’S for maximum reduction.  No motor.  Requires 60 to 100...
      For Information...
    • IEN# 119192 - GRUNDLER HOG Hammermill with 30" Wx23"DIA. rotor and 5.75" shaft inlet of 30"X28", this unit has 4 rows of 6 hammers 1.5" THICK
      For Information...
    • IEN# 120139 - 125 HP - Wood Hog - JEFFREY - Model 34WB with 100 HP Main Motor. This unit was rebuilt with new Hammers and Screens. Also include Main Motor and Stone trap. Top feed design, Rebuilt a few months before shut down. App. capacity 5-9 Tons/hrs with...
      For Information...
    • IEN# 119168 - 125 HP Champion Hammer Mill with Main Motor. Model 15 x 38. This unit has gone through the shop with new Hammers & Screens. Painted ready for production.
      For Information...
    • IEN# 119169 - 125 HP JACOBSON Wood Hammer Mill with Motor featuring ¼” screens. Model P-361D. 1775 RPM motor direct drive rotor and 17'' x 24'' top in-feed opening with 6'' auger in bottom of hopper to meter Wood into hammer mill.  Bottom discharge with 10'' x...
      For Information...
    • IEN# 119429 - 125 HP Hammermilll mfg. Jacobson. Mdl P-361Dsc with magnet spouting.This unit includes a 125 Hp. , 1800/3/440, TEFC- 1780 rpm Main Motor with electronic current sensors , addition spare screens from 1/8" to approx. 5/8" screen, a used door. One...
      For Information...
    • IEN# 119189 - HammerMill mfg. ROSS. FOR LAB OR FARM USE, 18" WIDE WITH HOPPER
      For Information...
    • IEN# 119170 - 150 HP PRATER Hammer Mill, 440/3/60- 3565 RPM YEAR 1972. Model GOH-38. This unit has never ran, like new condition and still on the Factory shipping Skid. With 66 Hammers of 2" x 6 1/4" x 1/4". It has 1,368 sq/in screen area with dimension of 36" x...
      For Information...
    • IEN# 119195 - 75 HP hammermiill mfg. Stedman MODEL A-24X20 with fan.
      For Information...
    • IEN# 120128 - Two (2) Complete Hammermill Systems by Champion. 30” x 44” Rotors, Each have (2) 30” x 60” screen areas driven by Twin 250 HP motors (250HP, 1800RPM, 3/60/460). Also available is the meal cyclone 70” diameter x 270” high with pull through scroll...
      For Information...
    • IEN# 119667 - 200 HP mfg. Jacobson. This Hammermill is a model 2436 and features a 200 HP main Motor and electrical Control panel.
      For Information...
    • IEN# 119191 - Hammermilll mfg. WILLIAMS HOG 5.5" SHAFT 30" with a rotor (28"DIA.) and counterweight 1/2" thick hammers
      For Information...
    • IEN# 119190 - 50 Hp Top Feed Hammermill mfg. JACOBSON MODEL# P-241.
      For Information...
    • IEN# 119196 - 40 HP Hammermill mfg. Williams Wood HOG 17" WIDE WITH 2.5 " WIDE P 7' long x50" wide x 38" tall
      For Information...
    • IEN# 119428 - 125 HP Wood Hog mfg. Jeffery. Model 34WB. This unit features a 100HP motor and was rebuilt with Hammers and Screens. Top feed design, this unit was rebuilt a few months before shut down. App. capacity 5-9 Tons/hrs with current grid.
      For Information...
    • IEN# 119166 - 100 HP JACOBSON Hammer Mill. Model 24214D less Motor. This first unit is Rebuilt with NEW Bearings, Seals, Pins, Hammers and Screens. It has been sandblasted, painted and ready for production. No motor. It will accept a 50-100 Hp. Motor 3,600 RPM....
      For Information...
    • IEN# 119197 - 250 HP Hammermill mfg. SW BAUER BROS ATTRITION MILL 36" DIA.
      For Information...
    • IEN# 119194 - Hammermill mfg. FITZMILL D6, 6" ROTOR & S.S. ROTOR HOUSING, 1/4 X 1 X 4 1/2 KNIVES.
      For Information...
    • IEN# 120138 - 125 HP - Hammer Mill CHAMPION Model 15 x 38 with Main Motor. This unit has gone throught the shop with new Hammers & Screens. Painted ready for production.
      For Information...
    • IEN# 119193 - 100 HP hammermill mfg. JACOBSON P 360 D.
      For Information...